Is there a way to globally set the voice name, such that all prompts subsquently use that rather than have to add a <voice> tag everywhere? I do not see a property setting available to do so, and I would like to change the default voice.
Thanks.
We've Moved! Please visit our new and improved forum over at our new portal: https://portal.plumvoice.com/hc/en-us/community/topics
Globally Set Voice Name
IVR application to Globally Set Voice Name
Hi Tom:
no, unfortunately that is only settable on a per prompt basis at the moment, but we are in the process of adding a way to make it settable at IVR application or at least document scope.
This has been as much of an inconvenience for us as well...hope to have it resolved soon.
sincerely,
Plum Support
no, unfortunately that is only settable on a per prompt basis at the moment, but we are in the process of adding a way to make it settable at IVR application or at least document scope.
This has been as much of an inconvenience for us as well...hope to have it resolved soon.
sincerely,
Plum Support
Re: Globally Set Voice Name
Is the global setting feature going to be available anytime soon?
Re: Globally Set Voice Name
Hi,
Yes, there is a global setting feature that is currently available. This can be done by using a root document and the “voicename” property. Below is a quick example on how this works:
Root.vxml:
Page1.vxml
As you can see, the property voicename is set in the Root.vxml document and is invoked within Page1.vxml. Therefore, all voice prompts within Page1 will be set to "Lauren".
Regards,
Plum Support
Yes, there is a global setting feature that is currently available. This can be done by using a root document and the “voicename” property. Below is a quick example on how this works:
Root.vxml:
Code: Select all
<?xml version="1.0"?>
<vxml version="2.0">
<property name="voicename" value="Lauren"/>
</vxml>
Code: Select all
<?xml version="1.0"?>
<vxml version="2.0" application = “Root.vxml”>
<form>
<field name="myfield">
<grammar type="application/x-jsgf" mode="voice">
( one | two )+
</grammar>
<prompt>
Say any number of the digits one or two.
</prompt>
<filled>
You said <value expr="myfield" />.
</filled>
</field>
</form>
</vxml>
Regards,
Plum Support
Plum Support
http://www.plumvoice.com
http://www.plumvoice.com
Re: Globally Set Voice Name
What are all the properties that can be set at global level?
Can you please post the list.
I was looking for info if <prosody> can be set at global level.
Thanks
Kesh
Can you please post the list.
I was looking for info if <prosody> can be set at global level.
Thanks
Kesh
Re: Globally Set Voice Name
Here is a list of all properties: http://www.plumvoice.com/docs/dev/voicexml:properties
However, there is no global prosody property.
However, there is no global prosody property.
Plum Support
http://www.plumvoice.com
http://www.plumvoice.com